Tanks working under pressure

STATIONARY RESERVOIRS OF HIGH PRESSURE

We make stationary pressure vessels for any type of working environment as well as any pressure or temperature as it is required by the customer. We produce containers of any volume, designed for any working pressure and temperature of the working environment. At the request of the customer, it is possible to manufacture stationary tanks with several compartments. Vertical pressure vessels, in addition to standard ones, are manufactured for the operating pressures of 4.5 MPa. and the temperatures up to 400 ° C with the volumes from 0.25 to 50.0 m3. Vertical tanks with a pressure of over 1.0 MPa, a temperature of over 200 ° C and a volume of more than 10.0 m3 are made by special order and are calculated on the basis of a specific, special estimated cost. High-pressure tanks with a diameter of up to 1200 mm (inclusive) are installed on three supports for a diameter of more than 1200 mm. - requires installation on four supports. While ordering it is necessary to indicate the type of the working environment, volume, pressure and temperature of it. In addition to the standard version in receiver mode, the horizontal pressure vessels are manufactured for pressures up to 4.5 MPa., temperatures up to 400 ° C and volumes from 0.25 to 50.0 m3. Horizontal tanks for the pressure more than 1.0 MPa.,  rhe temperatures over 100 ° C and the volume over 10.0 m3 are made by special order and calculated on the basis of a specific, special calculation. Please, while ordering the product be sure to indicate a catalogue number of the air chamber as well as volume, pressure, and temperature of the working environment.

The horizontal steel double-walled tank is a welded steel horizontal and vertical cylindrical tank with conical and flat bottoms, internal stiffness rings, dividing compartments, hatches Du 800 and Du 600,with the underground and elevated versions. For the slinging while transporting an empty tank, eyelets are provided. The tank is designed to store liquid petroleum products at ambient temperatures from minus 40ºС to plus 90ºС

An underground horizontal drainage tank, type EP (without a heater), is designed to drain residues of light and dark oil products, oil, oils, condensate, including mixed with water from technological networks (pipelines) and apparatuses from all industries.

Underground horizontal drainage tank, EPP type (with heater) is designed to drain residues of light and dark oil products, oil, oils, condensate, including mixed with water from technological networks (pipelines) and apparatuses in all industries.

Devices of type TU 3683-101-00217298-98 horizontal and vertical with a volume2.4m3 to200.0m3 The devices are used in the technological installations of the gas, oil and oil refining industries for gaseous and liquid hydrocarbon environment.
Environments must have a category and explosion hazard group of no more than II-A-T3 according to GOST 12.1.011, the hazard of a substance - no more than 3 hazard classes according to GOST 12.1.007-76. The liquid should have a density of not more than 1000 kg / m3, a temperature not exceeding the one on that the vapor pressure of the liquid can exceed the working pressure.
The devices are not intended for the storage of the liquefied hydrocarbon gases in storage conditions.
The devices are designed for installation from I to V inclusive of the geographical areas of the CIS in terms of high-speed wind pressures, seismicity up to 8 points inclusive, according to SNiP 2.01.07-85 and SNiP II-7-81. The devices can be operated in areas with a temperate, cold and tropical climate. Devices can be equipped with external and internal heat exchangers

Horizontal cylindrical vessels for liquefied butane of the type BS are intended for ground storage of liquefied butane with the wall temperatures from minus 600C to plus 500C and for storage of light fractions of gasoline. It is allowed to use vessels for storage of other liquefied hydrocarbon gases with the vapor pressure of no more than 500C of vapor pressure of butane.

Horizontal cylindrical vessels for liquefied propane of the PS type are intended for ground storage of liquefied propane with a wall temperature of minus600 C to plus500 C.
It is allowed to use vessels for storage of other liquefied hydrocarbon gases, the vapor pressure of that doesn't excrd temperature of 500C does not exceed the propane evaporation density.

Horizontal all-welded machines with elliptical bottoms and a tube bundle of the type ГЭЭ1-1-V-р are intended for receiving, storaging and delivering of liquid and gaseous media at a nominal pressure in the apparatus of 0.6; 1.0 and 1.6 MPa.

Horizontal all-welded machines with elliptical bottoms and a tube bundle of the type ГЭЭ1-2-V-р are intended for receiving, storage and delivery of liquid and gaseous media under conditional when the pressure in the apparatus is 0.6 MPa with constant or periodic heating (or cooling).

Vertical all-welded machines with elliptical bottoms, type VEE 1-1-V-r, are designed for receiving, storing and dispensing liquid and gaseous media at a nominal pressure of the apparatus at 0.6; 1.0 and 1.6 MPa

Vertical all-welded machines with elliptical bottomsa and a jacket, type VEE 1-3-V-r designed for the reception, storage and delivery of liquid and gaseous media at a nominal pressure of the apparatus at 1.0 MPa with constant or periodic heating (or cooling).

Vertical detachable devices with an elliptical bottom and cover, type VEE 2-1-V-r are designed for receiving, storing and dispensing liquid and gaseous media at a nominal pressure of the apparatus at 0.6 and 1.0 MPa.

Vertical detachable devices with an elliptical bottom and a cover with a jacket, type VEE 2-3-V-r are designed for receiving, storing and dispensing liquid and gaseous media at a nominal pressure in the apparatus of 1.0 MPa with constant or periodic heating (or cooling) .

Vertical all-welded machines with flat bottoms, (with a coil), runway type 1-1 (1-4) are designed for the reception, storage and delivery of liquid non-explosive, non-fire hazardous, non-toxic media
with a density of not more than 2000 kg / m3 at atmospheric pressure with constant or periodic heating (or cooling).

Vertical all-welded devices with lower conical and upper flat (with a coil) type VKP 1-1 (1-4) are designed for reception, storage and delivery of liquid non-explosive, non-fire hazardous, and non-toxic media, at atmospheric pressure, with constant or periodic heating ( or refrigeration).

Vertical all-welded machines with the lower conical (900) flanged and upper elliptical bottoms of the type VKE 1-1-V-p are designed for receiving, storing and dispensing liquid and gaseous media at a nominal pressure in the apparatus of 0.6; 1.0 MPa.

Vertical devices with a conical (900) flanged bottom and a volumetric elliptical cover, type VKE 2-1-V-r, are designed for receiving, storing and dispensing liquid and gaseous media at a nominal pressure of 0.6 and 1.0 MPa in the device

Horizontal all-welded machines with conical (1400) bottoms, type GKK1-1 (1-6), are designed for receiving, storing and dispensing liquid and gaseous media at nominal pressure up to 0.07 MPa

Collections are designed for carrying out physicochemical processes in the liquid media. The collections are available in vertical and horizontal versions, with or without a shirt, in carbon or corrosion-resistant steel for the working under pressure up to 0.6 MPa and with a volume from 0.010 to 1.0 m3 Operating temperature in the case and jacket is from minus 200 C to2000 C.

Under the specific requirements from the customer, we will manufacture any such equipment in accordance with the applicable law.